 |
 |
 |
- There was dust, dirt or other contamination on the surface when paint was being applied.
- Improper surface preparation before painting.
- Top coat was incompatible with the previous coat.
- Water seepage from cement plaster seamline
- Insufficient or no primer sealer used.
- Wood is still raw/damp during painting
|
| Surface Preparation |
| Wood must be dry and free from grease, dirt and other contaminants, smoothen surface with suitable grade sand paper and dust off before application of undercoat and paints. Make good minor defects and cracks with Mesa Wood Putty Filla. |
| |
| Painting Guide |
| General painting system for wood surface is as follows: |
1.One coat of Mesa Undercoat
|
| 2.Two coats of Mesa High Gloss Enamel Paint. |
Colours & Effect